CUSTOM CUES - CUE REPAIR - CUE CONSIGNMENT - SINCE 2013




Cues purchased can be customized prior to shipping here in my cue shop many different ways.  We offer a large selection of tips, Irish linen wraps, leather wraps, genuine exotic wraps like lizard and elephant ear, specific ferrule materials, custom shaft tapering as well as custom weighting and balancing to fine adjustments if possible... If you have any questions or concerns please feel free to call me or text works very well. 

Searing Uniloc Shafts

Searing UniLoc Shafts

For sale are 3 Searing UniLoc shafts with ringwork that came from a cue that Dennis refinished and changed the pin in as well as made new shafts for it.  These shafts are used but not beat up and might make a great pairing with any UniLoc cue out there! 

  • Shaft 1: SOLD SOLD SOLD
  • Shaft 2: 29", 3.83oz, ivory ferrule, 12mm $299
  • Shaft 3: 29", 3.81oz, ivory ferrule, 12mm $299
  • SHAFTS 2 & 3 FOR $499
$349.00

$299.00

  • Ready to ship!
  • Ships within 1-3 days1

Barry Szamboti Cue

Barry Szamboti Cue "Diamonds & Lines"

For sale is a beautiful cue that is a very unique one time design by Barry Szamboti called "Diamonds & Lines", it was made for a prominent pool hall owner in PA.  This cue has it all, lots of ivory inlays, ivory joint and was refinished by Barry and never played with since, a TRULY HIGHLY COLLECTIBLE SZAMBOTI! 

  • 40 Total ivory inlays of Diamonds and Lines 
  • Each point has a medium diamond inlayed with an ivory line inlayed above and below, a total of 12 inlays in the points
  • The butt sleeve has 28 total ivory inlays of diamonds and lines in a very nice unique patern
  • Ivory joint 
  • Jet black Gaboon Ebony forearm 
  • 4 Points of Jet black Gaboon Ebony 
  • 4 Veneers of black, mahogany, green and maple
  • Jet black Gaboon Ebony butt sleeve
  • Nicely figured Birdseye Maple forearm
  • Original Cortland Irish linen wrap that is cream with green specs
  • Sitched veneer rings with matching veneers and maple
  • Below the wrap and at the butt cap is a set of stacked matching veneers
  • 1.5" Delrin butt cap
  • Stainless steel 5/16x14 compression joint
  • Butt is 29" & 15.03oz
  • Shaft 1 is 29" & 4.11oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29" & 4.06oz
  • Ferrule 2 is ivory & 13mm
$15,999.00

$12,999.00

  • Ready to ship!
  • Ships within 1-3 days1

EARLY Gus Szamboti WICO/INLAYS

EARLY GUS SZAMBOTI WICO/INLAYS

This is a VERY special and VERY EARLY Gus Szamboti... Not only is it one of the UBER rare Wico veneer forearms but it is the only known Gus Wico with inlays as well AND "This is one of the first 4 prong cues that Dad made" per the LOA...  

  • This is the ONLY known Gus Wico cue with inlays
  • Comes with LOA from Barry Szamboti 
  • One owner and all original condition
  • 8 Large and small Mother of Pearl inlays in the butt sleeve
  • Straight grain maple forearm
  • Jet black Gaboon Ebony butt sleeve 
  • 4 Points of Ebony jet black Gaboon Ebony
  • 4 WICO veneers vinyl of black, orange, green and white
  • Original Cortland linen wrap 
  • Black phenolic joint collars with thick single ring
  • 1.5" Delrin butt cap 
  • Stainless steel compression joint and 5/16x14 pin
  • Butt is 29.5" & 17.57oz  
  • Shaft 1 is 29.5" & 3.99oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29.5" & 3.31oz
  • Ferrule 2 is Ivory & 13mm
$13,999.00

$11,999.00

  • Ready to ship!
  • Ships within 1-3 days1

EARLY GUS SZAMBOTI

EARLY Gus Szamboti Ebony Cue

This cue is spoken for at this time... 

  • This is an EARLY & VERY RARE made "Fancy Gus" from that era
  • One owner and all original condition
  • Comes with LOA from Barry Szamboti 
  •  Jet black Gaboon Ebony forearm
  • Jet black Gaboon Ebony butt sleeve 
  • Maple stitched Szamboti rings with black & green veneers, 2 in the butt sleeve and one above the wrap
  • Original Cortland linen wrap 
  • White phenolic joint collars with thick single ring
  • 1.5" Delrin butt cap 
  • Stainless steel compression joint and 5/16x14 pin
  • Butt is 28.5" & 17.00oz  
  • Shaft 1 is 28.5" & 3.74oz
  • Ferrule 1 is ivory & 13.3mm
  • Shaft 2 is 28.5" & 3.40oz
  • Ferrule 2 is Ivory & 12.63mm
$10,999.00

$9,999.00

  • Sorry but this item is sold out

PFD Studios (PAUL DREXLER)

PFD STUDIOS (PAUL DREXLER)

Here is a one of a kind beauty by Paul Drexler of PFD studios in Connecticut.  This cue is COMPLETELY loaded and has 580 total inlays of ivory & fine silver as well as pink ivory wood!  

  • Each ringset which there are a total of 10 of are comprised of 58 inlays each, there are 6 sets of 3 fine silver circles interlocking and they are 2 ivory bands with 2-40 inlays (2 bands of 20 silver dots) and each ringset is made of ivory, fine silver, and black phenolic between the silver rings and the ivory rings 
  • This cue has a total of 48 points that are both short hand spliced, recut as well as CNC inlayed points, half are in the forearm and half in the butt sleeve repeating the design which is first a set of pink ivory points with 2 veneers of silver and Holly, then each of those points are recut and ivory points were inlayed inside of the others, there are finally a set of ivory curved CNC inlayed points between each of the others
  • Pink Ivory butt sleeve 
  • Pink ivory forearm 
  • Ivory joint 
  • Ivory butt cap 
  • Double segmented premium black elephant ear wrap 
  • Custom matched joint caps by PFD Studios with their logos in each top of the JP's labeling each shaft
  • Black G10 Radial joint pin
  • Butt is 29.25" & 15.76oz
  • Shaft 1 is 29.25" & 3.85oz
  • Ferrule 1 is Ivory & 13mm
  • Shaft 2 is 29.25" & 3.82oz
  • Ferrule 1 is Ivory & 13mm
$8,999.00

$7,999.00

  • Ready to ship!
  • Ships within 1-3 days1

Joseph Pechauer Custom

Joseph Pechauer Custom 1 of 1

Joe was born and raised to be a cuemaker. He began working on cues with his father, Jerry, and completed his first "solo" cue at the age of 12.  His career has been in partnership with Jerry helping to build the J. Pechauer Custom Cue reputation for impeccable quality.  As the Pechauer name continued to gain popularity as a great value for serious pool players, Joe felt an urge to show his skills by creating unique, one of a kind cues with intricate detail and exotic materials not normally seen in a Pechauer cue.  Each cue is comprised of materials such as superior Birds-eye Maple, Ebony or other exotic woods to which hundreds of inlays are added. The inlays are made of genuine pre-ban Elephant Ivory, Sterling Silver, Malachite, Turquoise, Mother of Pearl, Abalone, Amboyna Burl, Snakewood, Holly and Pink Ivory.  The finishing touch is added using exotic wraps of African Crocodile, Alligator, Ostrich, Lizard, Llama, or Exotic wood.  As each cue nears completion, Joe authenticates it with his Joseph Pechauer signature and numbers it 1 of 1.  Joe makes no more than twelve of these collector pieces per year. -Pechauer website

  • Over 200 total inlays in this gothic themed masterpiece by Joe Pechauer 
  • Jet Black West African Gaboon Ebony forearm 
  • Jet Black West African Gaboon Ebony butt sleeve
  • Over 100 ivory SHARP inlays 
  • Loads of turquoise inlays
  • Loads of Red Coral inlays 
  • Loads of Abalone inlays 
  • Sterling silver rings with turquoise and ivory inlays at all locations 
  • Crown Jewel shaft and a standard playing shaft
  • Solid ivory butt cap
  • Solid ivory joint 
  • Ivory ferrules 
  • Alligator wrap 
  • "Pechauer Speed Joint" (5/16x14)
  • Butt is 29" & 15.26oz
  • Shaft 1 is a "Crown Jewel Shaft" & 4.51oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29" & 4.37oz
  • Ferrule 2 is ivory & 13mm
$17,999.00

$7,999.00

  • Ready to ship!
  • Ships within 1-3 days1

20TH ANNIVERSary Mcworter Cue

20th Anniversary McWorter Cue

McWorter Custom Cues, are arguably one of the finest of the more modern designed one off makers in recent times and when you really look at the level of detail in his cues you will realize why very quickly.  His work is impeccable and very limited currently and they are very sought after due to his body of work in cues as well as a musician.  This particular cue was #7 of the 20 cues he made in an anniversary series he made to commemorate 20 years making cues, each cue had a different design of those 20.  

  • UNCHALKED CONDITION!
  • The forearm contains 6 sets of large & EXTREMELY sharp inlays of AMAZINGLY figured Amboyna Burl surrounded by ivory and outlined in fine silver lines that come together at an Abalone dot that splits them into three silver lines, in between each of these 6 sets is another Abalone dots with three silver lines on each side 
  • The butt sleeve contains 6 sets of medium & EXTREMELY sharp inlays of AMAZINGLY figured Amboyna Burl surrounded by ivory and outlined in fine silver lines that come together at an Abalone dot that splits them into three silver lines, in between each of these 6 sets is another Abalone dots with three silver lines on each side 
  • Ivory bands above and below the wrap
  • Beautiful lightly textured Italian Scotch grain black leather wrap
  • Jet black Gaboon Ebony forearm 
  • Jet black Gaboon Ebony butt sleeve
  • Twin silver rings at the joint and shaft collars
  • Black phenolic butt cap & shaft/joint collars
  • Custom joint cap for the butt
  • Stainless steel 3/8x10 joint pin
  • Butt is 29" & 15.08oz
  • Shaft 1 is 29" & 3.91oz
  • Ferrule 1 is Ivory & 12.85mm
  • Shaft 2 is 29" & 3.74oz
  • Ferrule 2 is ivory & 12.85mm

$5,599.00

  • Ready to ship!
  • Ships within 1-3 days1

MCWORTER CUE 1836

McWorter Cue 1836

McWorter Custom Cues, are arguably one of the finest of the more modern designed one off makers in recent times and when you really look at the level of detail in his cues you will realize why very quickly.  His work is impeccable and very limited currently and they are very sought after due to his body of work in cues as well as a musician.    

  • UNCHALKED CONDITION!
  • Beautifully figured Thuya Burl forearm 
  • Beautifully figured Thuya Burl butt sleeve
  • Ivory bands above and below the wrap
  • Beautiful lightly textured Italian Scotch grain black leather wrap
  • 5 Tall jet black Gaboon Ebony points 
  • 5 Short ivory points in between the tall points that are outlined in silver 
  • There are a total of 60 different ivory inlays in this cue completely outlined in silver
  • Twin silver rings at the joint and shaft collars
  • Black phenolic butt cap & shaft/joint collars
  • Custom joint cap for the butt 
  • Stainless steel 3/8x10 joint pin
  • Butt is 29" & 15.61oz
  • Shaft 1 is 29" & 3.88oz
  • Ferrule 1 is Ivory & 12.85mm
  • Shaft 2 is 29" & 3.59oz
  • Ferrule 2 is LBM & 12.85mm

$5,599.00

  • Ready to ship!
  • Ships within 1-3 days1

Bender Custom Cue

MINT Mike Bender Tuxedo Cue

They really do not get much better than this one! A beautifully designed high contrast ebony, ivory & fine silver tuxedo cue by Mike Bender of Dunham, Alaska!  This cue is absolutely mint condition and would be an awesome cue for any collection... 

  • Wrapless design
  • Segemented Ebony handle 
  • Ivory points 
  • Ivory butt cap
  • Ivory joint 
  • Ivory & fine silver rings at all positions
  • Stainless steel custom machined 3/8x14 joint pin
  • Butt is 29" & 16.48oz
  • Shaft 1 is 29" & 4.12oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29" & 4.10oz
  • Ferrule 2 is ivory & 13mm
$6,499.00

$5,499.00

  • Ready to ship!
  • Ships within 1-3 days1

Ed Young Custom Cue

Ed Young Custom Cue made for pro player Chris Gentile

This VERY hard to find Ed Young cue was owned & used by Chicago player Chris Gentile in the 2011 US Open One Pocket event where he went undefeated to the finals where he played and lost only one match in the finals to the great Efren Reyes...  Ed Young makes very few cues and has a very long wait to get a cue if you can even get on his list.  His influences in cuemaking are some of the finest like Craig Petersen, Burton Spain as well as David Kersenbrock...

  • Rare Brazilian Rosewood forearm
  • Rare Brazilian Rosewood butt sleeve
  • 6 Highly figured Birdseye Maple half spliced points 
  • Each of the 6 points of Birdseye Maple are recut with Brazilian Rosewood
  • Fine silver square ringwork at all locations including shafts 
  • Custom joint protectors with synthetic ivory tops engraved
  • Bronze custom machined 3/8x11 joint pin 
  • Butt is 29" & 14.48oz
  • Shaft 1 is 30" & 4.16oz
  • Ferrule 1 is LBM & 12.4mm 
  • Shaft 2 is 30" & 3.87oz
  • Ferrule 2 is LBM & 11.85mm
$4,999.00

$3,799.00

  • Ready to ship!
  • Ships within 1-3 days1

Schick Custom Cue

1993 Schick Custom Cue

  • Very good condition
  • Chicago style cue
  • Ivory joint 
  • Birdseye Maple forearm 
  • Birdseye Maple butt sleeve
  • 4 Gaboon Ebony points in the forearm
  • Each of the points has 4 spear inlays, 1 atop each point
  • 4 Gaboon Ebony points in the butt sleeve
  • Each of the butt sleeve points has 4 spear inlays, 1 atop each point into the butt cap
  • There is a PurpleHeart band above and below the wrap that the 8 points 
  • Ivory tipped pin with Old English "S" on the tip
  • Black Irish linen wrap very nicely pressed 
  • Twin silver rings at all locations including the shaft collars
  • Black phenolic butt cap and joint collars
  • Stainless steel 3/8x10 joint pin
  • Butt is 29.5" & 16.35oz
  • Shaft 1 is 29.5" & 3.63oz
  • Ferrule 1 is Ivory & 12.75mm
  • Shaft 2 is 29.5" & 3.51oz
  • Ferrule 2 is ivory & 12.25mm
$3,999.00

$3,749.00

  • Ready to ship!
  • Ships within 1-3 days1

Tascarella Custom Cue

61"-62" Tascarella Custom Cue

For sale is one of the "BIGGEST" Tascarella Custom Cues I have ever seen, when I say big I mean long, the cue is up to 62" long and only a hair over 19.5 ounces!  The cue is balanced perfectly and it hits like a Tascarella (like a hammer)...  Pete Tascarella made this long of a cue the right way in my opinion, he added an extra inch in the forearm, the handle as well as the butt sleeve and it looks and feels great for such a long cue, it actually feels very nimble for its size...

  • MINT CONDITION & all original, it has seen very little action
  • 32" butt and 29"-30" shafts
  • Bumperless Hoppe design for a louder hit and more noticeable feedback in your hand 
  • Ivory Hoppe ring
  • Ivory ferrules on 2 shafts
  • 4 Points of South American red Cocobolo 
  • 4 Veneers of black, red, mahogany & maple 
  • South American red Cocobolo butt sleeve
  • Perfectly installed red-brown leather wrap by Tascarella
  • Classic red-brown phenolic joint collars with ivory rings and matching stitched veneered ringwork on the joint and shaft collars
  • Classic red-brown phenolic butt cap
  • Stainless steel very well polished bolt inside the butt cap exposed 
  • Stainless steel joint & a rare big 3/8x10 pin
  • Butt is 32" & 16.12oz 
  • Shaft 1 is 30" & 3.51oz
  • Ferrule 1 is Elforyn & 13mm
  • Shaft 2 is 29.5" & 3.53oz
  • Ferrule 2 is ivory & 13mm
  • Shaft 3 is 29" & 3.53oz
  • Ferrule 3 is ivory & 13mm
$3,999.00

$3,499.00

  • Ready to ship!
  • Ships within 1-3 days1

Tonkin Custom Cue

Tonkin Custom Cue

  • Very good condition!
  • This cue contains 114 inlays of Abalone, and Juma consisting of multiple fancy Tiffany style diamonds and spears 
  • 60 Inlays alone in the shaft collars
  • 12 Inlays in the points 
  • 32 Inlays in the butt sleeve
  • All inlays are Juma & Abalone
  • Nicely figured babinga Forearm 
  • 4 Points of Jet black Gaboon Ebony
  • 6 Veneers is black, purple, black paper, aqua, black paper and electric blue
  • Jet black Gaboon Ebony butt sleeve 
  • Black lizard wrap 
  • Juma joint collar
  • Black phenolic butt cap  
  • Stainless steel modified 3/8x10 joint pin 
  • Butt is 29" & 15.27oz
  • Shaft 1 is 29" & 4.07oz
  • Ferrule 1 is Juma & 13mm
  • Shaft 2 is 29" & 4.03oz
  • Ferrule 2 is Juma & 12.8mm 

$3,099.00

  • Ready to ship!
  • Ships within 1-3 days1

Carmeli Custom Cue

MINT Carmeli Custom Cue

  • MINT CONDITION
  • 66 Total inlays of Elforyn
  • Jet black Gaboon Ebony forearm
  • 6 Points of jet black Gaboon Ebony 
  • 3 Veneers of holly, black & holly
  • Jet black Gaboon Ebony butt sleeve
  • Premium black Spanish bull wrap 
  • Twin silver rings with 8 fancy diamonds inlayed overtop of the rings at all locations including the joint and shaft collars
  • Elforyn joint
  • Elfroyn butt cap 
  • Stainless steel Modified 3/8x10 joint pin 
  • Butt is 29" & 15.01oz
  • Shaft 1 is 29" & 3.82oz
  • Ferrule 1 is LBM & 13mm
  • Shaft 2 is 29" & 3.79oz
  • Ferrule 2 is LBM & 13mm
$2,999.00

$2,599.00

  • Ready to ship!
  • Ships within 1-3 days1

"Scruggs by Barnhart"

Unchalked "Scruggs By Barnhart" Cues

Here are two simple yet timeless beauties that are not only highly collectible but cross collectible as well as they were made by two different cuemakers.  These are a couple of Tim Scrugg's final turned forearms that he gave to Cory Barnhart to finish with a hint of both of their styles!  

  • Both cues have Ivory joint with Radial pin 
  • Both cues have Ivory Hoppe ring 
  • Both cues have Ivory ferrules 
  • Both cues have 4 Points of jet black Gaboon Ebony 
  • The leather wrapped cue has black, maple, black and maple veneers
  • The black Irish linen wrapped cue has black, mahogany, black and maple veneers 
  • Both cues have Jet black Gaboon Ebony butt sleeves
  • Both cues have a high polished SS bolt in the rear of the cue and are bumperless 
  • The leather wrapped cue has a nicely figured Curly Maple forearm 
  • The linen wrapped cue has a nicely figured Birdseye Maple forearm 
  • Both cues have Cory's signature CNC inlayed silver dotted ringwork at the joint and both shaft collars

Leather wrapped cue specs:

  • Butt is 29" & 15.68oz
  • Shaft 1 is 29.5" &  3.88oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29.5" & 3.74oz
  • Ferrule 2 is ivory & 12.85mm

Linen wrapped cue specs:

  • Butt is 29" & 15.55oz
  • Shaft 1 is 29.5" &  4.15oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29.5" & 3.51oz
  • Ferrule 2 is ivory & 12.85mm
$2,999.00

$2,499.00

  • Ready to ship!
  • Ships within 1-3 days1

JossWest Custom Cue

JossWest Custom Cue refinished by Tascarella

For sale is a very nice early JossWest by Bill Stroud that has been refinished, rewrapped and two new shafts all by Pete Tascarella and not played since... The Birdseye in the forearm is as about as good as it can get and the cue plays wonderful with the new shafts...

  • Completely refinished w/new leather wrap and two new shafts all done by Pete Tascarella
  • HIGHLY figured Birdseye Maple forearm
  • Jet black Gaboon Ebony butt sleeve
  • 4 Point of jet black Gaboon Ebony 
  • 4 Veneers double black and double red 
  • Mother of Pearl inlays in the butt sleeve and points with veneered inlays in the points
  • Black phenolic joint collars with maple square ringwork
  • Brand new black smooth leather wrap by Tascarella
  • Delrin butt cap 
  • Stainless steel joint 5/16x18 pin 
  • Butt is 29" & 16.29oz
  • Shaft 1 is 29" & 3.62oz
  • Ferrule 1 is LBM & 12.6mm
  • Shaft 2 is 29" & 3.62oz
  • Ferrule 2 is LBM & 12.6mm
$2,799.00

$2,399.00

  • Ready to ship!
  • Ships within 1-3 days1

Searing Precision Cue

Searing Precision Cue "one of his absolute earliest cues"

I spoke with Dennis Searing about this cue and he stated "that is one of my absolute earliest cues" so circa 1990 and it plays like a dream and is in excellent condition... 

  • Full splice construction
  • Points are straight
  • Rosewood into straight grain maple 
  • 60" cue, 50/50 split
  • Red-Brown phenolic butt cap with "S" logo 
  • Red-Brown phenolic joint collars
  • RARE Piloted 3/8x10 joint 
  • Butt is 30" & 14.89oz
  • Shaft is 30" & 3.84oz 
  • Ferrule is LBM &  12.75mm
$2,999.00

$2,399.00

  • Ready to ship!
  • Ships within 1-3 days1

Cognoscenti Custom Cue

COGNOSCENTI CUSTOM CUE

  • EXCELLENT CONDITION, THE BUTT WAS JUST REFINISHED AT COGNOSCENTI
  • Jet black Gaboon Ebony forearm 
  • Jet black Gaboon Ebony butt sleeve 
  • 10 Ivory football shaped inlays in between the points in the butt sleeve and forearm
  • Fine silver rings at all positions including the joint and shaft collars
  • 5 Large Maple floating points in the forearm 
  • 5 Large Maple floating points in the butt sleeve  
  • Black with white spec Irish linen wrap 
  • Cognoscenti Truncated 7/16x11 black G10 joint pin
  • Butt is 29" & 15.17oz
  • Shaft is 28.5" & 3.17oz 
  • Ferrule is LBM & 12.8mm
$2,799.00

$2,199.00

  • Ready to ship!
  • Ships within 1-3 days1

Sly Custom Cue

Sly Custom Cue

  • Good used condition but the butt has a few VERY minor blemishes hence the price with all of the work
  • Total of 84 inlays of silver and ivory are in this cue
  • All white is ivory except the Delrin butt cap
  • Each point contains an inlayed ivory spear with a silver spear inlay inside, total of 8 in the points
  • The butt sleeve contains 12 ivory lines with a double ended spear of ivory inside of another spear of ivory with silver oval inlays on each side of it for a total of 28 inlays in the butt sleeve 
  • The ringwork at the shaft and joint collars contains a total of 48 inlays of ivory of spears 
  • 4 Points of jet black Gaboon Ebony
  • 4 Veneers in a cool flame transition of black, indigo, blue and maple 
  • Jet black Gaboon Ebony butt sleeve 
  • Very nicely figured Birdseye Maple forearm
  • Premium Italian Scotch black leather wrap
  • Ivory joint over SS machined collar  
  • Stainless steel 5/16x14 joint 
  • Butt is 29" & 15.38oz
  • Shaft 1 is 29" & 3.96
  • Ferrule 1 is ivory & 12.5mm
  • Shaft 2 is 29" & 3.81oz
  • Ferrule 2 is ivory & 12.35mm

$2,199.00

  • Ready to ship!
  • Ships within 1-3 days1

Sly Custom Cue

MINT Sly Custom Cue

  • Completely mint condition
  • All white is ivory except the Delrin butt cap
  • Ivory joint with machined silver ring at the end of the joint 
  • 24 Ivory inlays of fancy diamonds and dots in a Bushka theme
  • 4 Points of Jet Black Gaboon Ebony 
  • 4 Veneers of black, maple, green & a mossy green 
  • Nicely figured Birdseye Maple forearm
  • Jet black Gaboon Ebony butt sleeve  
  • Premium Italian Scotch black leather wrap
  • Black phenolic joint collars with with white dashes at the joint and shaft collars 
  • Ivory joint over SS machined collar 
  • Stainless steel 5/16x14 joint 
  • Butt is 29" & 14.96oz
  • Shaft 1 is 29" & 4.67oz
  • Ferrule 1 is ivory & 12.9mm
  • Shaft 2 is 29" & 4.17oz
  • Ferrule 2 is ivory & 12.8mm
$2,499.00

$2,199.00

  • Ready to ship!
  • Ships within 1-3 days1

Zinzola Custom Cue

Zinzola Custom Cue #89

  • A Total of 208 inlays of ivory & silver 
  • Ivory joint 
  • Ivory Hoppe ring 
  • 4 Ivory spears, one in each point 
  • 4 VERY TALL points of Macassar Ebony
  • 5 Veneers of black, red, black paper, orange, black paper & yellow 
  • Macassar Ebony butt sleeve 
  • 4 Large ivory inlays of spears in the butt sleeve
  • 4 Medium ivory dots atop each of the large ivory spears
  • 4 Medium ivory inlays of spears in between the large spears
  • 4 Small ivory dots atop each of the medium ivory spears
  • Ringwork consists of an intricate design of 2 silver dashes horizontally then an ivory square with a silver dot in the center repeated 8 times each in 6 sets of these rings, each ring has 32 inlays
  • Custom joint protectors with ivory tops engraved "Zinzola #89 2010" and "shaft one" and "shaft two" 
  • Real black lizard wrap 
  • Rare Ivory piloted 5/16x14 joint by Zinzola
  • Butt is 29" & 15.50oz
  • Shaft 1 is 29" & 4.03oz
  • Ferrule 1 is LBM & 12.75mm
  • Shaft 2 is 29" & 3.98oz
  • Ferrule 2 is LBM & 12.35mm
$3,499.00

$1,799.00

  • Ready to ship!
  • Ships within 1-3 days1

Tim Scruggs Custom Cue

Tim Scruggs Custom Cue

It does not get much more classic than this later made cue from the late and great Tim Scruggs out of Baltimore, Maryland!  These cues are a perfect example of what a traditional styled pool cue should look like...

  • Excellent condition all the way around 
  • Everything but the finish and leather wrap are original to the cue 
  • 4 Points of jet black Gaboon Ebony 
  • 4 Veneers of black, red, black & red 
  • Jet black Gaboon Ebony butt sleeve 
  • Straight grain dark Maple foream
  • Black phenolic joint collars with maple square ringwork
  • Black pigskin leather wrap perfectly installed 
  • Delrin butt cap with the later Scruggs logo
  • Stainless steel joint & 5/16x14 pin
  • Butt is 29" & 14.85oz
  • Shaft 1 is 29" & 4.32oz
  • Ferrule 1 is ivory & 12.8mm
  • Shaft 2 is 29" & 4.14oz
  • Ferrule 2 is ivory & 12.5mm
$1,999.00

$1,799.00

  • Ready to ship!
  • Ships within 1-3 days1

Omen Custom Cue

Omen Custom Cue

Here is a beautiful Omen Custom Cue made in Florida! The butt was just refinished by Pete Oman and the shafts are brand new!  This is basically a brand new cue for the price of a used one... 

  • Mint condition
  • 59" total length 
  • 12 Pointer 3 hi/3lo forearm points & 3hi/3lo in the butt sleeve
  • 3 of the points in the forearm are Ebony and 3 are Rosewood 
  • The 3 Ebony points have a red veneer in the forearm
  • All 6 of the points in the butt sleeve are highly figured Birdseye Maple 
  • The 3 tall points in the butt sleeve also have a matching red veneer
  • Ebony butt sleeve 
  • Black textured leather wrap
  • Black phenolic joint collars
  • Red, orange, black and silver veneered ringwork located at the butt cap and joint collars 
  • Black phenolic butt cap 
  • Stainless steel custom machined 3/8x11 pin that has a flat in it with OMEN engraved on it
  • Butt is 29" & 15.55oz
  • Shaft 1 is 30" & 3.91oz
  • Ferrule 1 is Juma & 13mm & brand new
  • Shaft 2 is 30" & 3.83oz
  • Ferrule 2 is Juma & 13mm & brand new
$1,999.00

$1,799.00

  • Ready to ship!
  • Ships within 1-3 days1

Dicola Custom Cue

Dicola Custom Cue

Dan DiCola, is originally a gunsmith that turned into a cue maker. Dan is skilled at developing fine exotic billiard cues. Currently, a rather young cue maker, but showing outstanding abilities in the complete process of developing precision built equipment. I am very impressed with his work and how well the cues play...

  • Ivory joint 
  • Ivory butt cap
  • 54 Total ivory & silver inlays that make up torch inlays that are indexed perfectly with the middle of the points
  • 6 Jet black Gaboon Ebony points, 3hi/3lo
  • Nicely figured Birdseye Maple forearm 
  • Jet black Gaboon Ebony butt sleeve
  • Uber premium black Elephant Ear wrap perfectly installed
  • Black phenolic joint collars with twin silver rings at the joint and shaft collars
  • Stainless steel Radial joint pin
  • Butt is 29.5" & 15.63oz  
  • Shaft 1 is 29" & 29.5" 
  • Ferrule 1 is ivory & 12.5mm
  • Shaft 2 is 29" & 29.5" 
  • Ferrule 2 is ivory & 12.3mm
$1,999.00

$1,599.00

  • Ready to ship!
  • Ships within 1-3 days1

Pierce CUstom Cue

BRAND NEW Pierce Custom Cue

  • BRAND NEW Cocobolo & BEM SW Style Pierce cue! 
  • 6 Points 3hi/3lo of Birdseye Maple
  • 2 Veneers of maple and rust
  • Red Mexican Cocobolo forearm 
  • Red Mexican Cocobolo butt sleeve 
  • Birdseye Maple SW segment in the butt sleeve 
  • SW Style rings made of Cocobolo w/rust and maple veneers
  • Black leather lizard wrap 
  • Stainless steel modified 3/8x10 joint pin 
  • Butt is 29" & 15.27oz
  • Shaft 1 is 29" & 3.77oz
  • Ferrule 1 is Tomahawk & 13mm
  • Shaft 2 is 29" & 3.71oz
  • Ferrule 2 is Tomahawk & 13mm
$1,599.00

$1,499.00

  • Ready to ship!
  • Ships within 1-3 days1

Pierce Custom Cue

Pierce Custom Cue

  • 60" 50/50 split
  • Barely used excellent condition
  • Beautiful wrapless design
  • Custom matching Birdseye Maple joint caps by Pierce with matching ringwork
  • 12 Points of highly figured Birdseye Maple, 6 in the forearm, 6 reverse points in the butt sleeve
  • 3 Super bright popping veneers of orange, green & black on all 6 points 
  • Jet black Gaboon Ebony forearm 
  • Jet black Gaboon Ebony butt sleeve 
  • Highly figured Birdseye Maple handle 
  • Stitched veneer ringwork with maple, black, orange & green veneers
  • Black phenolic butt cap
  • Black phenolic joint collars
  • Stainless steel modified 3/8x10 joint pin 
  • Butt is 30" & 16.59oz
  • Shaft is an Old Growth & 30" & 4.08oz
  • Ferrule is Tomahawk & 12.85mm
$1,749.00

$1,399.00

  • Ready to ship!
  • Ships within 1-3 days1

Pierce Custom Cue

NEW Pierce Custom Cue

  • BRAND NEW CONDITION!
  • SW Style cue 
  • Mexican Ziricote forearm
  • 6 Points of Gaboon Ebony, 3 hi/3lo
  • 3 Veneers of maple, black & maple 
  • Mexican Ziricote butt sleeve 
  • Gaboon Ebony segment in the butt sleeve separated by maple, black & maple veneers
  • Black phenolic joint collars with SW Style ringwork that includes ebony and maple veneers at all locations including the shaft  collars
  • Stainless steel modified 3/8x10 joint pin 
  • Butt is 29" & 16.12oz
  • Shaft 1 is 29.5" & 3.76oz & is Old Growth Maple
  • Ferrule 1 is Corian & 12.85mm
  • Shaft 2 is 29.5" & 3.3.64oz
  • Ferrule 2 is Corian & 12.75mm

$1,599.00

  • Ready to ship!
  • Ships within 1-3 days1

Pierce Custom Cue

MINT Pierce Custom Cue

  • MINT REFINISHED CONDITION!
  • SW Style cue 
  • Super Curly Maple forearm
  • 6 Points of Birdseye Maple, 3 hi/3lo
  • 3 Veneers of brown, maple & brown on the tall points
  • 1 Veneer of dark brown on the short points   
  • Super Curly Maple butt sleeve 
  • Birdseye Maple segment in the butt sleeve separated by brown, maple & brown veneers
  • Brown phenolic joint collars with SW Style ringwork that includes maple and brown veneers at all locations including the shaft  collars
  • Perfectly installed new leather wrap that matches perfectly
  • Brass modified 3/8x10 joint pin 
  • Butt is 29" & 15.48oz
  • Shaft 1 is 29.5" & 3.67oz & is Old Growth Maple
  • Ferrule 1 is Corian & 12.85mm
  • Shaft 2 is 29.5" & 3.56oz
  • Ferrule 2 is Corian & 12mm
$1,599.00

$1,499.00

  • Ready to ship!
  • Ships within 1-3 days1

Harry Richards Custom Cue

Harry Richards Custom Cue

Maker of pool cues from 1989 to present in Daytona Beach, Florida.  Harry Richards´ cuemaking experience started in Tampa, Florida, in the late 1980s. He was trying to find someone who knew how to put a tip on a cue and do it properly. It was there that he met Wayne Gunn, who had made cues and had the know-how for doing a good job. Harry decided that cuemaking would be something he might enjoy. Wayne took him under his wing and began the slow process of learning how to work on pool cues.  In 1989 Harry made his first sneaky pete, a great playing cue. He made sneaky petes, break jump cues, and merry widows for two years, learning, experimenting, and trying to find the secret ingredient that makes for an excellent playing cue. Every time he put a cue together, Harry was looking for something that could be done to make it even better than what it was. During this same time, Harry started doing cue work at pool tournaments around Florida. This was a valuable experience for him, learning what needed to be done to make a cue play better.  In about 1994, Harry met another cuemaker, Dennis Searing, from Ft Lauderdale. He had been making cues for quite some time. They became friends and swapped trade secrets. In 1999, Harry went to work for Dennis and gained an immense amount of education, for which Harry is thankful.  Harry unfortunately passed away in March of 2016... 

  • One of the finest hitting SS joint cues I have owned...
  • Rosewood Titlist conversion
  • Excellent condition
  • Rosewood full spliced into straight grain Maple with veneers
  • Titlist veneers of purple, teal, mahogany and maple 
  • I believe the Irish linen to be Cortland but I am not 100% sure that it is, it feels very soft and fine
  • Black phenolic ringwork with a single silver ring at the joint & shaft collar
  • 1.5" milk white Delrin butt cap
  • HR logo on the Delrin butt cap
  • Stainless steel joint and 5/16x14 pin with a true compression fit joint
  • Butt is 29" & 15.68oz
  • Shaft 1 is 29" & 4.05oz 
  • Ferrule 1 is LBM & 13mm

$1,499.00

  • Ready to ship!
  • Ships within 1-3 days1

Schick Custom Cue

Schick Sneaky Pete Cue

  • Red Leaf Dufferin conversion by Bill Schick 
  • Full splice construction
  • Rosewood into straight grain Maple 
  • Ivory old school thin butt cap with Schick logo engraved on the side of it
  • Black Irish linen wrap 
  • Stainless steel joint
  • Stainless steel 3/8x10 joint pin
  • Butt is 29.25" & 15.79oz
  • Shaft is 29.5" & 3.77oz
  • Ferrule is LBM & 13mm

$1,399.00

  • Ready to ship!
  • Ships within 1-3 days1

McDaniel Custom Cue

MINT McDaniel Custom Cue

  • Highly figured Birdseye Maple forearm
  • Highly figured Birdseye Maple butt sleeve
  • Perfectly installed and pressed Irish linen wrap 
  • Milk white 1.5" traditional Delrin butt cap 
  • McDaniel MC logo engraved on the Delrin butt cap
  • Stainless steel joint and 5/16x14 joint pin
  • Butt is 29" & 15.44oz
  • Shaft 1 is 29" &  3.95oz
  • Ferrule 1 is LBM & 13mm
  • Shaft 2 is 29" & 3.89oz  
  • Ferrule 2 is LBM & 12.75mm

$1,399.00

  • Ready to ship!
  • Ships within 1-3 days1

Tim Scruggs Custom Cue

Tim Scruggs Custom Cue

  • 2001 Made cue
  • Ivory Hoppe ring 
  • Ivory ferrules
  • Late Tim Scruggs logo with 01' engraved 
  • Beautiful red South American Cocobolo forearm
  • Beautiful red South American Cocobolo butt sleeve
  • Brand new black Premium calf leather wrap
  • Black phenolic rings with maple dashes and silver rings on each side located at the joint & shaft collars 
  • Black phenolic butt cap
  • Stainless steel joint & 5/16x14 pin 
  • Butt is 29" & 14.14oz
  • Shaft 1 is 29" & 4.05oz
  • Ferrule 1 is ivory & 12.85mm
  • Shaft 2 is 29" & 3.72oz
  • Ferrule 2 is ivory & 12.65mm
$1,499.00

$1,299.00

  • Ready to ship!
  • Ships within 1-3 days1

Herman Rambow Cue

1951 Herman Rambow Cue

  • 1951 Made and all original and the butt is almost straight
  • The cue was reviewed by Joel Hercek in Chicago some years back and deemed a 1951 made cue
  • Made from a full splice with veneers between the full splice 
  • Rosewood full spliced into straight grain maple
  • Veneers are clearly purple, green, mahogany and maple, usually the green veneer is more teal of the Titlist
  • Ivory/bone butt cap
  • Leather wrap that still feels nice 
  • Brass weight bolt that is in the center of the butt cap
  • Brass 5/16x14 piloted compression joint & pin
  • 18.39oz 29 3/8" 
  • 1.348" end of butt cap 
  • 1.355" end of butt sleeve 
  • 1.350" below wrap 
  • 1.045" above wrap 
  • .7335" at end of joint 
  • 3.73oz 12.4mm 27 3/4" BEM 
  • 3.22oz 11.9mm ivory 27 3/8" 
$2,499.00

$1,299.00

  • Ready to ship!
  • Ships within 1-3 days1

68'-72' joss BLOCK LETTER Cue

68'-72' Joss Block Letter Cue

Another very cool old Joss cue that was made when Dan Janes and Bill Stroud were still making cues together in Baltimore! These cues were some of the best players of that time and they have their timeless classic looks just like a 1970's muscle car! 

  • Excellent overall condition, butt has been refinished by Joss with another shaft matched 
  • Ivory butt cap 
  • Ivory ferrules
  • 4 Inlays of Mother of Pearl, one in each point
  • Rosewood butt sleeve 
  • Nicely figured Birdseye Maple forearm 
  • 4 Rosewood points 
  • 4 Veneers of black, orange, green and maple 
  • White with green specs Irish linen wrap
  • Classic Joss rings with maple squares at the joint and shaft collars
  • Stainless steel joint and 5/16x14 joint pin
  • Butt is 28.5" & 15.74oz
  • Shaft 1 is 28.75" & 3.98oz  
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 28.75" & 3.67oz
  • Ferrule 2 is ivory & 12.65mm 

$999.00

  • Ready to ship!
  • Ships within 1-3 days1

Tonkin Custom Cue

Tonkin Custom Cue

Pete Tonkin makes a very nice cue and this is one of the few entry level cues that he will make these days. This would be great for someone wanting to try out one of his cues without investing relatively much...

  • Excellent condition!
  • Nicely figured Birdseye Maple forearm 
  • 4 Long and sharp African Padauk points
  • African Padauk butt sleeve
  • Juma butt cap
  • Juma joint 
  • Black phenolic joint collars
  • Stainless steel modified 3/8x10 joint pin 
  • Butt is 29" & 15.11oz
  • Shaft is 29" & 4.09oz
  • Ferrule is Juma & 13mm
$1,399.00

$999.00

  • Sorry but this item is sold out

Martin Custom Cue

Mike Martin Custom Cue

  • Very highly figured Birdseye Maple butt 
  • 4 Full length "Saturn Ring" butterfly splices 
  • The cue was sliced apart and reconstructed 4 times to show this effect 
  • It has 3 veneers of chocolate brown, maple and chocolate brown between all of the splices
  • Black phenolic butt cap
  • Black phenolic joint collar
  • Stainless steel 3/8x10 joint pin 
  • Butt is 29" & 14.97oz
  • Shaft 1 is 29" & 4.17oz
  • Ferrule 1 is Micarta & 13.3mm
  • Shaft 2 is 29" & 3.91oz
  • Ferrule 2 is Micarta & 12.80mm
$2,499.00

$999.00

  • Ready to ship!
  • Ships within 1-3 days1

Tim Scruggs Custom Cue

Tim Scruggs Sneaky Pete

  • Excellent condition, much better than most of these I see as they were players and most of them got used quite often
  • Full splice construction
  • PurpleHeart full spliced into straight grain maple 
  • Points are straight 
  • Finish is excellent for its age
  • TS stamp between the points
  • Piloted 5/16x14 true sneaky joint
  • Butt is 29" & 14.95oz
  • Shaft is 29" & 3.86oz
  • Ferrule is LBM & 13mm

$875.00

  • Ready to ship!
  • Ships within 1-3 days1

Prevail Handcrafted cue

NEW Prevail Handcrafted Cue

I bought this cue on a whim as I have done a few deals IIRC with the maker a few times and figured he would make a great cue if he started and he does.  This is a lot of cue for the money and it is well polished, the work is accurate and the materials are second to none... Gerry Pepin, of Prevail Handcrafted Cues in Alberta, Canada...

  • MINT CONDITION
  • Rosewood butt sleeve 
  • 4 Rosewood points 
  • Titlist style veneers of purple, teal, mahogany and maple
  • Straight grain maple forearm
  • Juma joint collar with machined SS insert
  • Juma butt cap
  • Brown with white spec Irish linen wrap
  • Stainless steel 5/16x14 joint pin w/machined phenolic pilot with true compression fit
  • Butt is 29.5" & 15.88oz
  • Shaft is 29.5" & 3.18oz
  • Ferrule is Mason Micarta & 13mm
$849.00

$699.00

  • Ready to ship!
  • Ships within 1-3 days1

Clint Putnam Custom Cue

Clint Putnam Custom Cue

  • 2007 Made cue
  • Ivory Hoppe ring
  • Ivory ferrules
  • 4 Gaboon Ebony points
  • 4 Veneers of black, green, orange and maple
  • Gaboon Ebony butt sleeve 
  • Birdseye Maple forearm 
  • Szamboti style stitched matching veneer ringwork at the joint and both shaft collars
  • Joint collars are black phenolic 
  • Butt cap is black phenolic 
  • Stainless steel joint & 5/16x14 pin
  • Butt is 29" & 14.24oz
  • Shaft 1 is 29" & 4.51oz
  • Ferrule 1 is ivory & 13mm
  • Shaft 2 is 29" & 3.89oz
  • Ferrule 2 is ivory & 13mm
$899.00

$699.00

  • Ready to ship!
  • Ships within 1-3 days1

Dayton Custom Cue

Paul Dayton Custom Cue

A simple yet elegant nice playing cue from Paul Dayton of Florida! 

  • Very good used condition
  • Highly figured Birdseye Maple forearm
  • Highly figured Birdseye Maple butt sleeve 
  • Black with white spec Irish linen wrap nicely pressed
  • Signed "Dayton" at the bottom of the butt sleeve 
  • Black phenolic joint collar and butt cap 
  • Stainless steel 5/16x14 compression fit joint and collar pin
  • Butt is 15.98oz
  • Shaft is 3.65oz
  • Ferrule is ivory & 12.75mm 

$499.00

  • Ready to ship!
  • Ships within 1-3 days1

Hills Custom Cue

Hills Custom Cue

  • A very neat butterfly full spliced cue by Darren Hill
  • Signed "Hills Cues '13"
  • Very figured Goncalo Alves spliced into Birdeye Maple 
  • 6 Veneers are between the full splice of yellow, black paper, lime green, lime green, black paper and yellow
  • Elforyn Hoppe ring 
  • Black phenolic joint collar and butt cap 
  • Black thin phenolic with white phenolic ringwork at the joint and shaft collar 
  • Brass Modified 3/8x10 joint pin 
  • Butt is 29" & 14.99oz
  • Shaft 1 is 3.64oz 
  • Ferrule is Elforyn & 12.75mm 
$899.00

$499.00

  • Sorry but this item is sold out

Fisher Custom Cues

BRAND NEW Fisher Custom Cues

1- BRAND NEW Yellow Heart Merry Widow $375

Butt is 29" & 14.92oz

Shaft is 29" & 3.75oz

Ferrule is LBM & 13mm 

 

2- BRAND NEW Bloodwood 8 Pointer $399

Butt is 29" & 15.82oz

Shaft is 29" & 3.93oz

Ferrule is LBM & 13mm 

 

3- BRAND NEW Cocobolo 8 Pointer $399

Butt is 29" & 15.14oz

Shaft is 29" & 4.23oz

Ferrule is LBM & 13mm 

 

4- BRAND NEW Cocobolo SW Style $499

Butt is 29" & 15.26oz

Shaft is 29" & 4.12oz

 

Ferrule is LBM & 13mm 

$499.00

$375.00

  • Ready to ship!
  • Ships within 1-3 days1